7 replies to this topic

[Tex-Shooter]

Thera-Band Thickness

Tan - .10146mm - .004 inch
Yellow - .1524mm - .0068 inch
Red - .2032mm - .008 inch
Green - .2540mm - .01 inch
Blue - .3048mm - .0120 inch
Black - .381mm - .0150 inch
Silver - .5538mm - .0218 inch
Gold - .6350mm - .025 inch

Of course tolerances apply on all thicknesses.
The bands that I make are .030 inch (two per side) Tex

[AaronC]

Good info! I was looking for that!

[Tex-Shooter]

I made a misstake and had to correct the black. Tex

[Chuff]

Hi Tex,
after seeing your figures for flatband it made me curious so I got out the old micrometer (") and ruler (mm) to measure mine.
The one I measured was my ergo hunter made by Fish at Hunter catapults here in England. They measure .028inch thick and taper in width from 30mm at the fork to 25mm at the pouch. 220mm in length and doubled up each side they don`t mess about!!!

[Tex-Shooter]

Chuff, on 06 January 2010 - 10:24 AM, said:

Hi Tex,
after seeing your figures for flatband it made me curious so I got out the old micrometer (") and ruler (mm) to measure mine.
The one I measured was my ergo hunter made by Fish at Hunter catapults here in England. They measure .028inch thick and taper in width from 30mm at the fork to 25mm at the pouch. 220mm in length and doubled up each side they don`t mess about!!!

The.028 is right since the Gold has a +/- .003. The next set might be .022 thick. The same tolerance applies to the .030 that I sell they can vary +/- .003 also. - Tex

[Scrambler84]

Hey sent you a personal message and wanna know if when I am ready to put Rubber on my Sharpshooter the bands look like they are narrow.
So if and when I get reay to replace them I will send you Photos or you were telling me you have one so I will get with you on your Reccomendations Thanks .
Also enjoying the Bands I got from you They are fast shoot hard and really like flat band compared to Tubes.

[Tex-Shooter]

Thanks Scrambler! -- Tex

[CaptainFuntik]

I would like more specifics